Check out the Rock A Bye Campers Channel on Youtube.com
Rock-A-Bye Enterprises LLC
3676 S Whispering Sands Dr
Casa Grande, AZ 85193-7434
United States
ph: 520 421 7037
steve
Sold only with camper purchase
CJ74: $707
Prices subject to change
Easily load or unload your truck camper with this pair of sturdy cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage.
Features:
Specs:
Note: Always use these jacks in pairs on level ground. Not approved for commercial or rental use.
Lifting your truck camper on and off of your pickup truck is challenging if you don't have the right equipment. This pair of reliable cable jacks helps you load and unload your camper with ease. No permanent installation is required, so you won't have unsightly and expensive electric jacks hanging off of your camper. And because these jacks break down into 3 portable, easy-to-assemble pieces, you can take them everywhere the road takes you.
Ideal for Tall Pickup Trucks
Got a super tall or lifted pickup? No problem. The uppermost poles on these jacks are elongated so you can lift your camper up to 67" off the ground, which should be more than enough to clear the bed rails of even the loftiest truck on the road.
Simple Operation
Using these jacks is simple. Place 1 jack on each side of your camper and position the L-shaped lift brackets underneath the body of the camper. Then crank the hand winches to lift or lower each side of the camper evenly until the proper height for loading or unloading is achieved.
It is recommended that 2 people operate the jacks simultaneously to make it easier to raise each side of the camper evenly. However, 1 person can do the job by alternately lifting or lowering each jack in small increments.
Rock-A-Bye Enterprises LLC
3676 S Whispering Sands Dr
Casa Grande, AZ 85193-7434
United States
ph: 520 421 7037
steve